Jiangyin Dingbo Technology Co.,Ltd

Mobile: 0086 13921262246 Email: yzj@dingbokj.com

Home > News > Content
Transformer Core Slitting Line After The End Of The Work Need To Complete The Steps
- Jun 13, 2017 -

  The core transformer plays an important role in the overall operation of the slitting line

  During the operation of the slitting line, the core transformer plays a very important role in the whole operation process. Both the iron core transformer plays an irreplaceable role in the shearing process or the winding process, Here we come to a specific understanding of what.

  The slitting line is used to roll the metal coil through the unwinding, slitting, and winding into the desired width. Applicable to the processing of cold-rolled and hot-rolled carbon steel, silicon steel, tinplate, stainless steel and surface coated with various types of metal materials.

  Transformer core slitting line after the end of the work need to complete the steps:

  (1) to clean the edge material. (2) do a variety of records. (3) cleaning tools, high-speed slitting line, cleaning production site.

  Note: 1. After power should pay close attention to the equipment abnormal situation should immediately stop and do the appropriate treatment. 2. Non-staff is strictly prohibited near the running equipment. 3. When the equipment is running, the slitting line shall not cross the rotating piece of material. 4. Before each knife, you must clean the tool and the upper and lower knife shaft, and with No. 20 ~ 25 lubricating oil lubrication, so as not to affect the tool end jump, or even scratch the knife axis. 5. Regularly check all fastening bolts are loose and take appropriate measures, the equipment according to the specified time frequency lubrication maintenance. 6. After cutting work, turn off the power. 7. Uncoiler, winding machine shall not be a long time hanging material.