Jiangyin Dingbo Technology Co.,Ltd

Mobile: 0086 13921262246 Email: yzj@dingbokj.com

Home > News > Content
Shearing Machine Safe And Reliable Operation Is Convenient
- Sep 12, 2017 -

The shearing machine is one kind of machine tool, it uses the hydraulic actuation, the safe performance is reliable, the operation is convenient. Cutting machine working blade length: 400mm, 600mm, 700mm, 800mm, 1000mm, 1200mm, shearing force from 63 tons to 400 tons eight grades, suitable for different sizes of different requirements users. The installation does not need to base the foot screws, the power supply can be used in the local diesel engine power. The shearing machine is suitable for the metal recycling processing plant, the scrap automobile dismantling field, the smelting foundry industry, the various shapes of the steel and all kinds of metal materials for cold shearing, suppressing flanging, as well as powder products, plastics, FRP, insulating materials, rubber compacting molding.

Shearing machine is divided into different types are: Metal shearing machine, combined punching machine, hydraulic shearing machine bar cutting machine.

The most commonly used in metal shearing machine is the crocodile-type shearing machine and the gantry shearing machine.

Crocodile-type shearing machine is suitable for metal recycling companies, scrap steel mills, smelting foundry enterprises to various shapes of steel and various metal structures for cold shearing, processing of qualified burden Mei Cheng Mechanical shearing machine using hydraulic drive, easy to operate, simple maintenance. Shearing force from 63 tons to 400 tons a total of 8 grades.

Characteristics

(1) The motor can adopt programmable controller according to the demand;

(2) hydraulic system using advanced cartridge valve or sliding valve system control, the implementation of the button centralized operation of the hydraulic machine;

(3) The pressure, speed and stroke can be adjusted according to the process needs, and can finish the pressing molding and shaping two kinds of process.

Hydraulic Shearing machine, the series of models applicable to metal recycling processing plants, scrap auto dismantling field, smelting foundry industry, the various shapes of steel shearing machine and a variety of metal structures for cold shearing, processing into qualified burden. The characteristics of the series of products: ① hydraulic drive, safe performance and reliable, easy to operate. ② Work Blade Length: 400mm, 600mm, 700mm, 800mm, 1000mm, 1200mm, shearing force from 63 tons to 400 tons eight grades, suitable for different sizes of different requirements for the user's choice. ③ installation does not need to base foot screws, where there is no power to use diesel engine power ...

Characteristics:

(1) The use of hydraulic drive, easy to operate, simple maintenance.

(2) Working blade Length: 400mm, 600mm700mm800mm1000mm1200mm, shearing force from 63 tons to 400 tons a total of 8 grades. More than 700mm cutting machine, especially suitable for cutting scrap car.

(3) Install the engine without the bottom foot screws, the power supply can be used in the local diesel engines.

Considerations

1. Without learning, the machine structure, performance and operating procedures are not allowed to operate without permission.

2. The lubrication Department of the machine shall, as required, add at least one lubricant per class.

3. Add the hydraulic oil in the fuel tank, should strictly use the high quality anti-wear hydraulic oil, must pass through the strict filtration, and should maintain the sufficient oil quantity frequently, when insufficiency should raise the oil liquid immediately.

4. The fuel tank should be cleaned and replaced with new oil once a year, but the first cleaning filter oil can not be more than one months, the use of a new oil after strict filtration to allow again.

5. When there is a serious leakage of oil or abnormal phenomenon in the work, should immediately stop, analysis of the cause and troubleshooting, not forced to run the disease.

6. In the course of operation or packing, the machine shall not repair or touch the moving parts by hand, and it is prohibited to press the material in the material box with the hand or foot.

7. Pumps, valves, pressure gauges to adjust, must have experienced technical workers to carry out, such as the discovery of the pressure gauge failure, should immediately check or update the table.