Jiangyin Dingbo Technology Co.,Ltd

Mobile: 0086 13921262246 Email: yzj@dingbokj.com

Home > News > Content
Shearing Machine Safe And Reliable Operation Easy To Operate
- Nov 02, 2017 -

Shearing machine is a kind of machine, it uses hydraulic drive, safe and reliable, easy to operate. Shearing force from 63 tons to 400 tons of eight grades, suitable for different sizes of different requirements of users. Installation without foot screws, no power supply where the diesel engine can be used for power. Shearing machine for metal recycling plants, scrap car dismantling field, smelting foundry industry, various shapes of steel and various metal materials for cold cutting, pressing the flanging, and powder products, plastic, glass steel, insulation Material, rubber compression molding.

Shearing machine is divided into different types are: metal cutting machine, the joint punching machine, hydraulic shearing machine bar shearing machine.

The most commonly used in metal shears is the crocodile shearing machine and the gantry shearing machine.

Crocodile shears for metal recycling companies, scrap mills, smelting foundry enterprises of various shapes of steel and a variety of metal structures for cold shear, to process qualified furnace material Sheng Cheng mechanical shear machine using hydraulic drive, easy to operate , Easy maintenance. Shear force from 63 tons to 400 tons a total of eight grades.

Steel gantry shearing machine, mainly for steel, copper, nickel and other metal sheet of open materials. Shear force from 100 tons to 250 tons. Mainly cut material size (12 ~ 20mm) * 250mm. Cut the number of 8 to 12 times per minute. The series requires a simple infrastructure. Compared with the mechanical transmission type shearing machine, the mechanical gantry shearing is small in size, light in weight, low in inertia, low in noise, smooth in motion, flexible in operation and large in shearing section. Hydraulic integration control, can be implemented a single, continuous action conversion, easy to use, can be stopped in any work, run, easy to achieve overload protection. Applicable to a wide range, can be used for metal recycling processing unit processing equipment, but also as a factory casting workshop of the furnace processing and mechanical construction industry, metal cutting processing equipment.

Features

(1) the motor on demand the use of programmable controller;

(2) hydraulic system using advanced cartridge valve or slide valve system control, the implementation of the button to focus on the operation of the hydraulic machine;

(3) its pressure, speed and stroke can be adjusted according to the needs of the process, and to complete the compression molding and stereotypes two processes.

Hydraulic shearing machine, the series models for metal recovery processing plants, scrap car dismantling field, smelting casting industry, the various shapes of steel shears and a variety of metal structure of the cold cut, processed into qualified charge. The series of product features: ① the use of hydraulic drive, safe and reliable, easy to operate. ② working blade length: 400mm, 600mm, 700mm, 800mm, 1000mm, 1200mm; shear force from 63 tons to 400 tons eight grades, suitable for different sizes of different requirements of the user's choice. ③ installation without foot screws, no power where the diesel engine can be used as power ... ...

Features:

(1) the use of hydraulic drive, easy to operate, easy maintenance.

(2) Working blade length: 400mm, 600mm700mm800mm1000mm1200mm, shear force from 63 tons to 400 tons a total of eight grades. 700mm above the knife-edge shearing machine, especially for cutting scrapped cars.

(3) installation without foot screws, no power supply where the diesel engine can be used for power.

Precautions 

1. Those who are not learning, do not understand the structure of the machine, performance and operating procedures are not allowed to start the machine.

2. The lubrication of the machine should be at least once a day.

3. To add the hydraulic oil in the tank, should be strictly used high-quality anti-wear hydraulic oil, must undergo a rigorous filtration, and should always keep enough oil, should fill the oil immediately when insufficient.

4. The fuel tank should be cleaned and replaced every six months, but the first time the filter oil can not be cleaned for more than one month. Once again, the new oil is allowed to pass once after strict filtration.

5. When there is more serious oil spills or abnormal phenomena in the work, should immediately stop, analyze the reasons and troubleshooting, not forced to run sick.

6. Machine in the operation or packing process, shall not be repaired or hand touch the movement parts, is strictly prohibited by hand or foot in the box to press the material.

7. Pump, valve, pressure gauge to adjust, you must have experienced technical workers, such as the pressure gauge is found to be faulty, should immediately check the check or update the table.