Jiangyin Dingbo Technology Co.,Ltd

Mobile: 0086 13921262246 Email: yzj@dingbokj.com

Home > News > Content
Shearing Machine For Metal Recovery Processing Plants
- Aug 16, 2017 -

  Shearing machine is a kind of machine, it uses hydraulic drive, safe and reliable, easy to operate. Shearing machine for metal recovery processing plants, scrap car dismantling field, smelting foundry industry, various shapes of steel and various metal materials for cold cutting, pressing the flanging, and powder products, plastic, glass steel, insulation Material, rubber compression molding. In the use of cutting machine widely used today, the use of cutting machine we have to understand the use of cutting machine precautions, the following Xiaobian to bring you the use of cutting machine precautions.

  Shearing machine use Note:

  1. Those who are not learning, do not understand the machine structure, Shearing machine performance and operating procedures are not allowed to start the machine.

  2. The lubrication of the machine should be at least once a day.

  3. To join the tank of hydraulic oil, should be strictly used high-quality anti-wear hydraulic oil, must undergo a rigorous filtration, and should always keep enough oil, should fill the oil immediately when insufficient.

  4. The fuel tank should be cleaned and replaced every six months, Shearing machine but the first time the filter oil can not be cleaned for more than one month. Once again, the new oil is allowed to pass once after strict filtration.

  5. When there is more serious oil spills or abnormal phenomena in the work, should immediately stop, analyze the reasons and troubleshooting, not forced to run sick.

  6. Machine in the operation or packing process, shall not be repaired or hand touch the movement parts, is strictly prohibited by hand or foot in the box to press the material.

  7. Pump, valve, pressure gauge to adjust, you must have experienced technical workers, Shearing machine such as the pressure gauge is found to be faulty, should immediately check the check or update the table.