Jiangyin Dingbo Technology Co.,Ltd

Mobile: 0086 13921262246 Email: yzj@dingbokj.com

Home > News > Content
Purlin Machine Easy Operation And Easy Maintenance
- Sep 12, 2017 -

Purlin machine, the production of cement purlin machinery. Purlin, horizontal parts distributed along the length of the roof, located on the main rafters, supporting the secondary roof rafters. Rural housing used to provoke the rafters, made of the roof of the horizontal wood, is one of the main components of the House, also known as the truss, in the slope of the roof is often used in the roof truss or oblique beam, and then add Lookout and tile, as the dependent component of the Times and Stripes. Because of durability and price/performance ratio, cement purlin is more widely used than wood and steel.

Use place: prestressed concrete column Forming machine is according to modern rural township building facilities and economic development needs, on the basis of the prestressed concrete column forming machine, a new model is developed, and the column machine, the grape frame machine, the purlin machine, the pillar machine, the cement column machine, the cement products manufactured are mainly used in the Vegetable greenhouse column, Grape frame column, orchard Pillar, livestock farm, flower planting shed column, farm and so on. Compared with the traditional handicraft industry, the machine work efficiency is increased 10-15 times, and the operation is simple, maintenance is convenient. The machine can design a variety of models and sizes.

Safe use: Column machine purlin machine before use, to see whether the cohesion can be reliable, installation bolts, nuts can be tightened, left and right chassis should be added to the full smooth oil, can be energized engine test. The mould used by the purlin machine of the column machine needs a model of the upper die and six of the same standard scale, the first device on the die and a lower die, the lower die directly installed on the six-side wheel operating table, on the bottom of the sliding seat, and the appropriate thickness of the pad, to ensure that the upper and lower mold, the surrounding edge gap evenly, The spacing between the upper and lower modes equals the thickness of the desired tile. Then the above model is quasi, the operation table is shifted, the other five pay down die, all the device good up and down the future ability to drive the pressure tile. First empty work carefully observed, there was no sensation, noise, oil window can come to oil, all parts of the movement can be harmonious, all normal after the talent device mold, the installation of mold, it is necessary to intercept the power supply, carefully moving the motor belt or large gear, the column purlin machine to make the work table to turn, and make the slider to the highest point Best use an object to support between the operating table and the bottom of the sliding seat, in case the sliding seat natural whereabouts, to form a disturbance.

Note: Purlin machine in the use of the process to pay attention to a few points:

1,Purlin machine work need to close the electrical cabinets, junction boxes, console doors or the lid to avoid fouling.

2,regular inspection and regular fastening of pipe joints, in order to prevent the loosening of oil spills.

3,to ensure that the accumulator gas pressure sufficient and normal capsule, or timely treatment.

4,must maintain the work voltage stability, the fluctuation value does not exceed the rated voltage 5%-10%.

5,the operator is not allowed to the hydraulic components privately removable, when the failure, should be timely analysis of the reasons, should be the technical personnel in time to troubleshoot equipment maintenance, do not allow the machine to work, in order to prevent major accidents.

Above four points is the production of purlin should meet the requirements, the specific needs of what kind of purlin products, but also according to the building of the situation analysis.