Cable Tray Making Roll Forming Machine
Introduction of cable tray machine This production line may produce the cable tray, the different sizes through the replace punching mould to complete.
High Quality Cable Tray Making Roll Forming Machine
Cable tray roll forming machine uses cantilever type at the two sides, the punch press do the round ribs in bottom or different holes’stamping and cutting. The material is guided into main roll forming machine by guider. By electrical control, automatically improve and adjust different width and height.therefore, it is really a new type of energy-saving and high-effective producing equipment for purlin. And cable tray roll forming machine has many advantages, just like high forming speed, low noise, stable transmission, easy operation, good appearance and so on.
1.The production line can produce many sizes of cable tray according to producing requirement.(material steel width 100mm≤§≤860mm)
2. Line speed:2.5-5M/min
3.Continuous forming speed:10-15M/min
4. Steel thickness:1-2.5mm
5. Material : Mild steel ,galvanized steel coil
6. The production line divide into two operations: automatic &handle. It can work with linkage and subsection.
After sale services
a). Engineer will give free training lessons to labors in buyer’s factory.
b). Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer.
c). During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
d). We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.